It Lives!!!

The 1UZ vvti came to life today! Changed the oil, put water in it and stuck a hose to short circuit the in and output to the radiator, hooked it up to a battery and my starting board and:

Notice the temp (but awesome) MAF setup!

 MAF:

My starting board including the original ECU (notice serial #) 4 relays setup just like the stock wiring diagram with the EFI relay turning everything else on.  The 3 wiring harnesses from the motor are not plugged into the ECU in this photo:

Harnesses from the engine directly to the ECU

I spent a lot of time cleaning out the harnesses, in some cases this is all thats left in a harness:

For more info on wiring up a 1UZ check out Lextreme.com and: http://oldschool.co.nz/2011/forum/index.php?showtopic=30736